- Removed dead Broadcom hardware IDs (4357/4358/4360/4727) from `_is_broadcom_b43`, retaining only valid ID 4352 to eliminate false positives in the case statement.
- Added a guard in `_handle_wireless` Level 3 to verify `linux-headers` availability via `apt-cache policy`. Skips DKMS compilation if headers are missing, preventing transaction failures during installation.
- Implemented Broadcom combo card detection (WiFi + Bluetooth) by scanning `PCI_BT_DEVS`. Automatically writes `/etc/modprobe.d/broadcom-combo.conf` with `softdep wl post: btusb` and warns users about potential reboot requirements.
- Enhanced Level 2 (`firmware-b43-installer`) with post-installation validation for `/lib/firmware/b43`. Provides clear recovery instructions via `sudo dpkg-reconfigure firmware-b43-installer` if the directory is empty or missing after installation.
- Created a new helper `_msg_red()` in `utils.sh` to handle critical error messages with colored Whiptail output, replacing standard alerts for migration warnings and failures.
- Updated `repos/migrate.sh` to use `_msg_red()` for branch migration warnings and failure states, ensuring visibility of critical issues while keeping completion messages informative.
- Verified headless mode guards across 16 separate extras files (`office.sh`, `fetch.sh`, `cursors.sh`, etc.), preventing unnecessary package installations on servers without display environments.
- Completed syntax verification (`bash -n`) across all core and extra modules, ensuring no errors in the updated logic for firmware, gaming, swap, or repository management scripts.
- update readme.md
- Implemented global `_pause()` logic across all modules (`utils`, `gaming`, `firmware`, etc.), replacing hardcoded `read -p` calls to standardize exit pauses.
- Unified MangoHud installation into a single command (`apt install -y mangohud:i386`) for gaming and legacy branches.
- Refactored `_inst()` to return `*` instead of `(installed)`, moving the function globally to `utils.sh` and removing duplicates from helpers.
- Enhanced Broadcom WiFi detection with expanded grep patterns ('network controller', 'wireless', etc.) and ID fallback (`14e4`).
- Updated `_run_cmd` to integrate the new pause logic for consistent workflow interruptions during script execution.
- NVIDIA CUDA extrepo refactor in `modules/gpu/nvidia.sh`: removed unnecessary `i386_active` lines, updated warning to reference `v590 (unified metapackage)`, simplified installation from 18+10 versioned packages → `nvidia-driver-pinning-590 nvidia-driver firmware-nvidia-gsp`, eliminated `apt-mark hold` since pinning packages now handle it. DKMS verification and `NVIDIA_DRIVER_MODE="cuda-repo"` preserved.
- CUDA repo case fix in `modules/gaming.sh`: replaced silent bypass with detection of `nvidia-driver-libs:i386` v590 installation; if missing, prompts user confirmation before installing via active CUDA repo + pinning.
- Palemoon internet module overhaul (`modules/extras/internet/internet.sh`): removed deprecated `_enable_palemoon_repo()`, created new `install_palemoon()` with AVX2→AVX→SSE2 CPU detection from `/proc/cpuinfo`, proper `extrepo enable` call, and package installation.
- ProtonVPN module rewrite (`modules/extras/internet/internet.sh`): removed broken `_enable_protonvpn_repo()` that failed due to missing suite; created new `install_protonvpn()` using `stable` suite + `proton-vpn-gtk-app` package with proper validation.
- Java/Minecraft rename across `modules/gaming.sh` and `modules/extras/java.sh`: renamed `_install_gaming_java()` → `install_minecraft_java()`, updated menu title from "Java Runtimes for Gaming" to "Java Runtimes for Minecraft", changed whiptail tag from `"java-jre"` to `"java"`.
- RetroArch + 4 classic cores (`modules/gaming/tools.sh` and `.sh`): added RetroArch entry to gaming menu, new case handler in `gaming.sh`, updated installation command to include `libretro-mgba libretro-snes9x libretro-nestopia libretro-gambatte`, enhanced notice with emojis, core enumeration, DFSG warning, and wiki link.
- OnlyOffice server status (`modules/extras/office/office.sh`): added fallback message for slow or down OnlyOffice servers to improve user experience during installation.
- Full syntax validation: all modified files pass `bash -n` without errors; no residual references to old variables (`i386_active`, `590.48.01`) or functions remain.
- Documentation about Debian and the script is added to supplement important information.
- update README.md
- Replaced the fragile upstream script installer with native Deb822 repository injection and automated GPG keyring management in `jellyfin.sh`. Eliminated external dependencies, checksums, and interactive flags for guaranteed non-interactive support across Bullseye/Bookworm/Trixie.
- Upgraded the NVMe module (`modules/extras/system/system.sh`) to perform multi-drive scanning with dynamic `lsblk` parsing. Replaced single-disk detection logic with a `while read` loop to capture all devices, displaying formatted SMART health diagnostics (Critical Warning, Temperature, Percentage Used).
- Overhauled the 'System Information' TUI into a multi-device dashboard featuring standalone GPU/Driver hierarchies and dynamic storage mapping. Added new globals (`DISPLAY_SERVER`, `STORAGE_SUMMARY`) and comprehensive arrays for Network/Wi-Fi interface indexing in `modules/utils.sh`.
- Redesigned the graphics stack layout to fix multi-GPU text clipping and unified Mesa version prompting logic. Integrated post-install package telemetry to display live versions in the completion screen, separating planning visualization from installation decision points in `modules/gpu.sh`.
- Fixed non-free-firmware conceptual documentation bugs and expanded Backports descriptions with hardware-focused educational text. Added non-free repository safeguards for Trixie/Bullseye compatibility under "Firmware & Wireless Drivers".
- Refactored repository logic in modules/repos.sh to eliminate dead code (redundant default_text variables) and strict-hardcoded layout behaviors, standardizing dialog geometry to a clean matrix.
- Updated README.md
- Replaced the restrictive head -n1 hardware parsing with a dynamic while read loop. The script now fully detects and registers multiple coexisting GPUs (Intel+Nvidia / AMD+Nvidia).
- Rewrote install_gpu_drivers() in modules/gpu.sh from a mutually exclusive case block to independent, sequential if conditions. Laptops now install both integrated firmware (Intel/AMD with non-free VA-API acceleration) and dedicated graphics stacks (Nvidia driver + 32-bit libs for Steam) seamlessly in a single pass.
- Improved Nvidia Kepler architecture guards under Debian 13 (Trixie). The script now safely skips missing legacy Nvidia packages without aborting or crashing the remaining Intel/AMD configurations.
- Added nvme-cli utility installation across all Debian versions. For Bookworm and Trixie, it features dynamic hardware validation via lsblk transport filtering and interactive, real-time SMART log viewing with an execution screen-pause.
- Created a brand new standalone module (modules/extras/dev/jellyfin.sh) to cleanly inject Jellyfin Media Server across Debian 11, 12, and 13 using its official setup script, protected by strict SHA256 checksum validations and guaranteed error-cleanup.
- Added OpenRGB to the Gaming menu for Debian 12 and 13. Implemented secure curl downloads with an emulated Chrome User-Agent to bypass Codeberg bot blocks, complete with automatic i2c-dev module configuration, user groups provisioning, and udev permission rules execution.
- Standardized menu headers across 15 separate files using a centralized readonly SCROLL_HINT=" [↑↓]" variable, replacing messy hardcoded strings with clean, uniform Whiptail instructions.
- update README.md
- Refactored `is_backports_enabled()` to dynamically detect backports using `DEBIAN_CODENAME` instead of hardcoded strings, improving script portability.
- Added support for standalone classic backports files (`/etc/apt/sources.list.d/debian-backports.list`) and deb822 format (`*.sources`) to ensure consistent detection across different repository configurations.
- Resolved Mesa and Kernel backports detection bugs, ensuring correct dialogue prompts and preventing false error messages during installation.
- Implemented smart rounding for zram memory allocation to the nearest Gigabyte for optimized performance.
- Enhanced Whiptail manual input validation for zram to block empty, non-numeric, or zero values.
- Introduced a dedicated `software_centers.sh` module for the modular and clean installation of GNOME Software and Plasma Discover.
- Added smart desktop environment detection (GTK/QT) to automatically suggest and install the optimal software center.
- Implemented a two-phase installation flow for software centers (Base Store -> Optional Flatpak support) with static consistency warnings based on the detected desktop environment.
- update README.md
- Created dedicated `extras/java.sh` module for modular Temurin/Adoptium repository handling and isolated GPG key management.
- Implemented selective JRE/JDK installation paths: Gaming (Minecraft) vs Development environments with version control selectors.
- Enhanced user group membership logic (`_ensure_sudo_group`) to auto-configure administrative privileges on fresh installs.
- Introduced maintenance-friendly passwordless sudo for `apt`, `systemctl`, and shutdown commands via `/etc/sudoers.d/`.
- Added home directory ownership repair utility to fix root-owned files in user directories after improper `sudo` usage.
- Enabled visual password feedback (`pwfeedback`) toggle for enhanced terminal usability during authentication prompts.
- Refactored Debian 13/Trixie repository sourcing logic to ensure idempotency and prevent backports/duplicate sources conflicts.
- Updated Bullseye legacy modules (extras.sh, repos.sh) to exclude deprecated packages (`hx`, `vscodium`) and enforce Firefox ESR defaults.
- Cleaned repository configurations by removing obsolete `bullseye-updates` source entries to prevent dependency conflicts.
- Implemented NVTOP conditional detection logic ensuring display only on active Nvidia drivers or supported architectures (Trixie/Bookworm).
- Corrected `/modules/bullseye/extras.sh` menu mappings (Programming, Dev Tools) and verified package lists excluding incompatible tools (`hx`, `vscodium`).
- Integrated ClamAV security module with daemon state management and background scan execution flows in all Security menus.
- update README.md
- Created dedicated modules/bullseye/` folder for legacy isolation (Debian 11 support).
- Implemented 4-block inclusive PCI range detection for Nvidia Kepler/Fermi to prevent black screens.
- Centralized system time verification checking against year 2026 before APT execution.
- Cleaned and purged modern package lists for the Bullseye extra software module.
- Updated main menu with conditional sourcing and fixed Option 7 (Gaming Lite) for Bullseye.
- Updated README.md with explicit TUI navigation instructions and full repository directory tree mapping.
stornic56