mirror of
https://github.com/stornic56/debianito-post-install.git
synced 2026-07-16 05:49:49 +00:00
stornic56
2ebb33460c
- Removed dead Broadcom hardware IDs (4357/4358/4360/4727) from `_is_broadcom_b43`, retaining only valid ID 4352 to eliminate false positives in the case statement. - Added a guard in `_handle_wireless` Level 3 to verify `linux-headers` availability via `apt-cache policy`. Skips DKMS compilation if headers are missing, preventing transaction failures during installation. - Implemented Broadcom combo card detection (WiFi + Bluetooth) by scanning `PCI_BT_DEVS`. Automatically writes `/etc/modprobe.d/broadcom-combo.conf` with `softdep wl post: btusb` and warns users about potential reboot requirements. - Enhanced Level 2 (`firmware-b43-installer`) with post-installation validation for `/lib/firmware/b43`. Provides clear recovery instructions via `sudo dpkg-reconfigure firmware-b43-installer` if the directory is empty or missing after installation. - Created a new helper `_msg_red()` in `utils.sh` to handle critical error messages with colored Whiptail output, replacing standard alerts for migration warnings and failures. - Updated `repos/migrate.sh` to use `_msg_red()` for branch migration warnings and failure states, ensuring visibility of critical issues while keeping completion messages informative. - Verified headless mode guards across 16 separate extras files (`office.sh`, `fetch.sh`, `cursors.sh`, etc.), preventing unnecessary package installations on servers without display environments. - Completed syntax verification (`bash -n`) across all core and extra modules, ensuring no errors in the updated logic for firmware, gaming, swap, or repository management scripts. - update readme.md
444 lines
16 KiB
Bash
444 lines
16 KiB
Bash
#!/usr/bin/env bash
|
|
|
|
# ── Global arrays ──
|
|
PCI_NET_DEVS=()
|
|
USB_WIFI_DEVS=()
|
|
PCI_BT_DEVS=()
|
|
USB_BT_DEVS=()
|
|
_DETECTED_FW_PKGS=()
|
|
_FW_PLAN_HW_LINES=()
|
|
_FW_PLAN_PKG_LINES=()
|
|
|
|
# ── Network device detection (PCI + USB) ──
|
|
_detect_all_network_devices() {
|
|
! is_installed pciutils && _run_install_pkg pciutils
|
|
! is_installed usbutils && _run_install_pkg usbutils
|
|
|
|
PCI_NET_DEVS=()
|
|
while IFS= read -r line; do
|
|
PCI_NET_DEVS+=("$line")
|
|
done < <(lspci -nn 2>/dev/null | grep -iE 'network controller|ethernet controller' || true)
|
|
|
|
USB_WIFI_DEVS=()
|
|
while IFS= read -r line; do
|
|
if echo "$line" | grep -qiE 'wireless|wifi|802\.11|bluetooth|wlan'; then
|
|
USB_WIFI_DEVS+=("$line")
|
|
fi
|
|
done < <(lsusb 2>/dev/null || true)
|
|
|
|
PCI_BT_DEVS=()
|
|
while IFS= read -r line; do
|
|
PCI_BT_DEVS+=("$line")
|
|
done < <(lspci -nn 2>/dev/null | grep -i 'Bluetooth controller' || true)
|
|
|
|
USB_BT_DEVS=()
|
|
while IFS= read -r line; do
|
|
if echo "$line" | grep -qi 'bluetooth'; then
|
|
if ! echo "$line" | grep -qiE 'wireless|wifi|802\.11|wlan'; then
|
|
USB_BT_DEVS+=("$line")
|
|
fi
|
|
fi
|
|
done < <(lsusb 2>/dev/null || true)
|
|
|
|
_FW_PLAN_HW_LINES=()
|
|
for dev in "${PCI_NET_DEVS[@]}"; do
|
|
local desc dev_type
|
|
desc=$(echo "$dev" | sed -E 's/^[^ ]+ [^:]+: //; s/ \[[0-9a-fA-F]{4}:[0-9a-fA-F]{4}\]//; s/ \(rev.*\)//')
|
|
if echo "$dev" | grep -qiE 'network controller|wireless|wi-fi|wlan|802\.11'; then
|
|
dev_type="WiFi PCI"
|
|
else
|
|
dev_type="Ethernet PCI"
|
|
fi
|
|
_FW_PLAN_HW_LINES+=(" \xe2\x97\x8f ${desc} (${dev_type})")
|
|
done
|
|
for dev in "${USB_WIFI_DEVS[@]}"; do
|
|
local desc
|
|
desc=$(echo "$dev" | sed 's/^.*ID //')
|
|
_FW_PLAN_HW_LINES+=(" \xe2\x97\x8f ${desc} (USB)")
|
|
done
|
|
|
|
for dev in "${PCI_BT_DEVS[@]}"; do
|
|
local desc
|
|
desc=$(echo "$dev" | sed -E 's/^[^ ]+ [^:]+: //; s/ \[[0-9a-fA-F]{4}:[0-9a-fA-F]{4}\]//; s/ \(rev.*\)//')
|
|
_FW_PLAN_HW_LINES+=(" \xe2\x97\x8f ${desc} (Bluetooth PCI)")
|
|
done
|
|
for dev in "${USB_BT_DEVS[@]}"; do
|
|
local desc
|
|
desc=$(echo "$dev" | sed 's/^.*ID //')
|
|
_FW_PLAN_HW_LINES+=(" \xe2\x97\x8f ${desc} (Bluetooth USB)")
|
|
done
|
|
}
|
|
|
|
# ── Firmware package mapping ──
|
|
_detect_firmware_needs() {
|
|
local -A pkg_info
|
|
_DETECTED_FW_PKGS=()
|
|
_FW_PLAN_PKG_LINES=()
|
|
|
|
local dev_list
|
|
dev_list=("${PCI_NET_DEVS[@]}" "${USB_WIFI_DEVS[@]}")
|
|
|
|
for dev in "${dev_list[@]}"; do
|
|
local raw_desc vendor_lc pkg
|
|
raw_desc=$(echo "$dev" | sed -E 's/^[^ ]+ [^:]+: //; s/ \[[0-9a-fA-F]{4}:[0-9a-fA-F]{4}\]//; s/ \(rev.*\)//')
|
|
vendor_lc=$(echo "$dev" | sed -n 's/^.*]: //p' | awk '{print $1}' | tr '[:upper:]' '[:lower:]')
|
|
|
|
[[ "$vendor_lc" != *intel* && "$vendor_lc" != *realtek* && "$vendor_lc" != *atheros* && "$vendor_lc" != *qualcomm* && "$vendor_lc" != *mediatek* ]] && continue
|
|
|
|
case "$vendor_lc" in
|
|
*intel*)
|
|
if echo "$dev" | grep -qiE 'wireless|wi-fi|wlan|802\.11'; then
|
|
pkg="firmware-iwlwifi"
|
|
else
|
|
pkg="firmware-intel-misc"
|
|
fi
|
|
;;
|
|
*realtek*) pkg="firmware-realtek" ;;
|
|
*atheros*|*qualcomm*) pkg="firmware-atheros" ;;
|
|
*mediatek*) pkg="firmware-mediatek" ;;
|
|
esac
|
|
|
|
local short_dev
|
|
short_dev=$(echo "$raw_desc" | sed 's/ *\[[^]]*\]//g; s/ */ /g')
|
|
if [ -z "${pkg_info[$pkg]-}" ]; then
|
|
pkg_info[$pkg]="$short_dev"
|
|
else
|
|
pkg_info[$pkg]+=", $short_dev"
|
|
fi
|
|
done
|
|
|
|
for pkg in "${!pkg_info[@]}"; do
|
|
_DETECTED_FW_PKGS+=("$pkg")
|
|
_FW_PLAN_PKG_LINES+=(" [+] ${pkg} \xe2\x86\x90 ${pkg_info[$pkg]}")
|
|
done
|
|
|
|
mapfile -t _DETECTED_FW_PKGS < <(printf '%s\n' "${_DETECTED_FW_PKGS[@]}" | sort -u)
|
|
}
|
|
|
|
# ── Broadcom chip classification helpers ──
|
|
_is_broadcom_brcm() {
|
|
local id="$1"
|
|
for supported in 4357 4358 4360 4727 43a0 43a1 43a2 43b1; do
|
|
[ "$id" = "$supported" ] && return 0
|
|
done
|
|
return 1
|
|
}
|
|
|
|
_is_broadcom_b43() {
|
|
local id="$1"
|
|
_is_broadcom_brcm "$id" && return 1
|
|
local dec=$((16#$id))
|
|
if [ "$dec" -ge $((16#4301)) ] && [ "$dec" -le $((16#4331)) ]; then return 0; fi
|
|
if [ "$dec" -ge $((16#4336)) ] && [ "$dec" -le $((16#4338)) ]; then return 0; fi
|
|
case "$id" in 4352) return 0 ;; esac
|
|
return 1
|
|
}
|
|
|
|
_is_broadcom_b43legacy() {
|
|
[ "$1" = "4302" ] || [ "$1" = "4306" ]
|
|
}
|
|
|
|
# ── Build plan string ──
|
|
_build_firmware_plan() {
|
|
local plan=""
|
|
plan+="This section installs the essential non-free firmware stack\n"
|
|
plan+="for Debian (including CPU microcode, GPU, network, and core\n"
|
|
plan+="drivers). The script has scanned your hardware to prepare\n"
|
|
plan+="the setup:\n\n"
|
|
|
|
plan+="Detected controllers:\n"
|
|
if [ ${#_FW_PLAN_HW_LINES[@]} -eq 0 ]; then
|
|
plan+=" (none detected)\n"
|
|
else
|
|
for line in "${_FW_PLAN_HW_LINES[@]}"; do
|
|
plan+="${line}\n"
|
|
done
|
|
fi
|
|
|
|
plan+="\nPlanned firmware packages:\n"
|
|
local fw_line
|
|
if is_installed firmware-linux-nonfree; then
|
|
local cur_ver
|
|
cur_ver=$(dpkg -l firmware-linux-nonfree 2>/dev/null | awk '/^ii/{print $3}')
|
|
fw_line=" [+] firmware-linux-nonfree ${cur_ver} (already installed)"
|
|
else
|
|
fw_line=" [+] firmware-linux-nonfree (base meta-package)"
|
|
fi
|
|
plan+="${fw_line}\n"
|
|
|
|
for line in "${_FW_PLAN_PKG_LINES[@]}"; do
|
|
plan+="${line}\n"
|
|
done
|
|
|
|
local has_bt=false
|
|
[ ${#PCI_BT_DEVS[@]} -gt 0 ] && has_bt=true
|
|
[ ${#USB_BT_DEVS[@]} -gt 0 ] && has_bt=true
|
|
if ! $has_bt; then
|
|
for dev in "${USB_WIFI_DEVS[@]}"; do
|
|
if echo "$dev" | grep -qi 'bluetooth'; then
|
|
has_bt=true; break
|
|
fi
|
|
done
|
|
fi
|
|
|
|
plan+="\nBluetooth:\n"
|
|
if $has_bt; then
|
|
if is_installed bluez; then
|
|
plan+=" [+] bluez (already installed)\n"
|
|
else
|
|
plan+=" [+] bluez + bluez-tools + bluez-obexd (base stack)\n"
|
|
fi
|
|
case "${DESKTOP_ENV:-other}" in
|
|
kde) plan+=" [+] bluedevil (KDE applet)\n"
|
|
if [ "${AUDIO_SERVER:-}" = "pipewire" ]; then
|
|
plan+=" → pipewire-pulse + wireplumber (if missing)\n"
|
|
fi
|
|
;;
|
|
gnome) plan+=" (already in gnome-control-center)\n" ;;
|
|
*) plan+=" [+] blueman (GTK Bluetooth manager)\n" ;;
|
|
esac
|
|
plan+=" → Bluetooth service will be enabled\n"
|
|
else
|
|
plan+=" (no Bluetooth hardware detected)\n"
|
|
fi
|
|
|
|
plan+="\nInstallation order:\n"
|
|
plan+=" 1. Base firmware (firmware-linux-nonfree)\n"
|
|
plan+=" 2. Network firmware (realtek, iwlwifi, ...)\n"
|
|
plan+=" 3. Broadcom / Bluetooth firmware\n"
|
|
|
|
echo -e "$plan"
|
|
}
|
|
|
|
# ── Install detected firmware packages ──
|
|
_install_detected_firmware() {
|
|
local to_install=()
|
|
for pkg in "${_DETECTED_FW_PKGS[@]}"; do
|
|
if is_installed "$pkg"; then
|
|
echo " --> $pkg already installed."
|
|
continue
|
|
fi
|
|
local ver
|
|
ver=$(apt-cache policy "$pkg" 2>/dev/null | awk 'NR==3 {print $2; exit}')
|
|
if [ -z "$ver" ] || [ "$ver" = "(none)" ]; then
|
|
echo " --> $pkg not available in repositories, skipping."
|
|
continue
|
|
fi
|
|
to_install+=("$pkg")
|
|
done
|
|
if [ ${#to_install[@]} -gt 0 ]; then
|
|
_run_cmd "Firmware" "sudo DEBIAN_FRONTEND=noninteractive apt install -y ${to_install[*]}" \
|
|
"Installing network firmware packages..."
|
|
fi
|
|
}
|
|
|
|
# ── Wireless handler (Broadcom 3-tier) ──
|
|
_handle_wireless() {
|
|
local installed_any=false
|
|
if [ ${#PCI_NET_DEVS[@]} -eq 0 ] && [ ${#USB_WIFI_DEVS[@]} -eq 0 ]; then
|
|
_detect_all_network_devices
|
|
fi
|
|
|
|
for dev in "${PCI_NET_DEVS[@]}"; do
|
|
local bcm_id
|
|
bcm_id=$(echo "$dev" | grep -oP '14e4:[0-9a-fA-F]+' || true)
|
|
[ -z "$bcm_id" ] && continue
|
|
local dev_id
|
|
dev_id=$(echo "$bcm_id" | cut -d: -f2 | tr '[:upper:]' '[:lower:]')
|
|
|
|
if _is_broadcom_brcm "$dev_id"; then
|
|
if ! is_installed "firmware-brcm80211"; then
|
|
_run_cmd "Broadcom" "sudo DEBIAN_FRONTEND=noninteractive apt install -y firmware-brcm80211" \
|
|
"Installing firmware-brcm80211..."
|
|
else
|
|
echo " --> firmware-brcm80211 already installed."
|
|
fi
|
|
installed_any=true
|
|
elif _is_broadcom_b43 "$dev_id"; then
|
|
if ! dpkg -l firmware-b43-installer >/dev/null 2>&1; then
|
|
_run_install_pkg firmware-b43-installer
|
|
fi
|
|
|
|
if [ ! -d /lib/firmware/b43 ] || [ -z "$(ls -A /lib/firmware/b43 2>/dev/null)" ]; then
|
|
_msg "b43 Firmware Warning" \
|
|
"The firmware-b43-installer package was installed, but the\n\
|
|
proprietary firmware download appears to have failed\n\
|
|
(no files found in /lib/firmware/b43).\n\n\
|
|
To fix this, connect a wired network and run:\n\
|
|
sudo dpkg-reconfigure firmware-b43-installer\n\n\
|
|
After the firmware is downloaded, reboot the system." 14 75
|
|
_pause
|
|
else
|
|
installed_any=true
|
|
fi
|
|
elif _is_broadcom_b43legacy "$dev_id"; then
|
|
_run_install_pkg firmware-b43legacy-installer
|
|
installed_any=true
|
|
else
|
|
local bcm_ver header_ver
|
|
bcm_ver=$(apt-cache policy broadcom-sta-dkms 2>/dev/null | awk 'NR==3 {print $2; exit}')
|
|
header_ver=$(apt-cache policy linux-headers-$(uname -r) 2>/dev/null | awk 'NR==3 {print $2; exit}')
|
|
|
|
if ! apt-cache policy "linux-headers-$(uname -r)" 2>/dev/null | grep -q "Candidate: [^ (none)]"; then
|
|
_msg "Broadcom Error" \
|
|
"linux-headers-$(uname -r) not available.\n\nCannot compile broadcom-sta-dkms without kernel headers." 10 60
|
|
_pause
|
|
continue
|
|
fi
|
|
|
|
if _confirm "Broadcom WiFi" "Install Broadcom driver?\n\nRequired for this chipset. Compiles a kernel module.\n\n broadcom-sta-dkms ${bcm_ver:-unknown}\n linux-headers-$(uname -r) ${header_ver:-unknown}\n\nProceed?"; then
|
|
_run_cmd "Broadcom" "sudo DEBIAN_FRONTEND=noninteractive apt install -y linux-headers-$(uname -r) broadcom-sta-dkms" \
|
|
"Installing Broadcom driver..."
|
|
|
|
local has_broadcom_bt=false
|
|
for btdev in "${PCI_BT_DEVS[@]}"; do
|
|
if echo "$btdev" | grep -qi 'broadcom'; then
|
|
has_broadcom_bt=true
|
|
break
|
|
fi
|
|
done
|
|
if $has_broadcom_bt; then
|
|
echo -e "${YELLOW}Broadcom combo card (WiFi + Bluetooth) detected.${NC}"
|
|
cat > /etc/modprobe.d/broadcom-combo.conf <<'EOF'
|
|
# Broadcom combo: ensure btusb loads after wl
|
|
softdep wl post: btusb
|
|
EOF
|
|
echo -e "${YELLOW}A reboot may be required for Bluetooth to work correctly.${NC}"
|
|
fi
|
|
|
|
echo "Broadcom proprietary driver installed. A reboot may be required."
|
|
_pause
|
|
installed_any=true
|
|
fi
|
|
fi
|
|
done
|
|
|
|
for dev in "${USB_WIFI_DEVS[@]}"; do
|
|
if echo "$dev" | grep -qi '0a5c'; then
|
|
_msg "USB Broadcom" "USB Broadcom adapter detected:\n\n ${dev}\n\nIf the adapter is not recognized after base firmware\ninstallation, ndiswrapper may be needed as a last\nresort.\n\nNote: Linux 5.15+ has improved support for many\nUSB Broadcom adapters." 12 65
|
|
fi
|
|
done
|
|
|
|
if ! $installed_any; then
|
|
echo "No special WiFi firmware needed -- base firmware-linux-nonfree covers this system."
|
|
_pause
|
|
fi
|
|
}
|
|
|
|
# ── Ensure non-free repository is enabled ──
|
|
_ensure_nonfree_repo() {
|
|
local nonfree_found=false
|
|
if [ -f /etc/apt/sources.list ] && grep -Eq '^[^#]*\bnon-free\b' /etc/apt/sources.list 2>/dev/null; then
|
|
nonfree_found=true
|
|
fi
|
|
if ! $nonfree_found && [ -d /etc/apt/sources.list.d ]; then
|
|
if grep -qr 'Components:.*\bnon-free\b' /etc/apt/sources.list.d/*.sources 2>/dev/null; then
|
|
nonfree_found=true
|
|
fi
|
|
fi
|
|
if $nonfree_found; then
|
|
return 0
|
|
fi
|
|
|
|
if _confirm "non-free Repository" "Component 'non-free' (and 'non-free-firmware') is required for WiFi/Bluetooth/GPU firmware.\n\nAdd them to your APT repositories?"; then
|
|
if [ -f /etc/apt/sources.list ]; then
|
|
sudo sed -i '/^deb / { /non-free/! s/\(main[^ ]*\)/\1 non-free non-free-firmware/ }' /etc/apt/sources.list
|
|
fi
|
|
if [ -d /etc/apt/sources.list.d ]; then
|
|
for f in /etc/apt/sources.list.d/*.sources; do
|
|
[ -f "$f" ] || continue
|
|
sudo sed -i '/^Components:/ { /non-free/! s/$/ non-free non-free-firmware/ }' "$f"
|
|
done
|
|
fi
|
|
sudo apt update
|
|
echo -e "${GREEN}non-free repository enabled.${NC}"
|
|
return 0
|
|
fi
|
|
return 1
|
|
}
|
|
|
|
# ── Main entry point ──
|
|
install_firmware() {
|
|
echo -e "${YELLOW}Base firmware check...${NC}"
|
|
|
|
if ! _ensure_nonfree_repo; then
|
|
_msg "Error" "No 'non-free' repositories were enabled and the user declined to add them.\nPlease enable non-free manually or accept the prompt in the Firmware option." 10 65
|
|
return 1
|
|
fi
|
|
|
|
# 1. Detect
|
|
_detect_all_network_devices
|
|
_detect_firmware_needs
|
|
|
|
# 2. Plan
|
|
local plan
|
|
plan=$(_build_firmware_plan)
|
|
_msg "Firmware & Wireless Setup" "$plan" 22 72
|
|
|
|
# 3. Confirm
|
|
if ! _confirm "Firmware" "Apply the network & firmware plan?"; then
|
|
echo "Firmware installation skipped."
|
|
_pause
|
|
return
|
|
fi
|
|
|
|
# 4. Install base firmware meta-package (unchanged logic)
|
|
local fw_pkg="firmware-linux-nonfree"
|
|
local fw_bpo
|
|
fw_bpo=$(apt-cache madison "$fw_pkg" 2>/dev/null | \
|
|
grep "${DEBIAN_CODENAME}-backports" | awk '{print $3}' | head -1)
|
|
|
|
local fw_stable
|
|
fw_stable=$(apt-cache policy "$fw_pkg" 2>/dev/null | awk 'NR==3 {print $2; exit}')
|
|
|
|
if is_installed "$fw_pkg"; then
|
|
if [ -n "$fw_bpo" ]; then
|
|
local current_ver
|
|
current_ver=$(dpkg -l "$fw_pkg" 2>/dev/null | awk '/^ii/{print $3}')
|
|
if _confirm "Firmware" "firmware-linux-nonfree ${current_ver} already installed.\n\nUpgrade to backports version ${fw_bpo}?\n\nBackports often includes newer hardware support."; then
|
|
_run_cmd "Firmware" "sudo apt install -y -t ${DEBIAN_CODENAME}-backports $fw_pkg" "Upgrading firmware..."
|
|
fi
|
|
else
|
|
echo "$fw_pkg already installed."
|
|
_pause
|
|
fi
|
|
else
|
|
local msg="firmware-linux-nonfree provides hardware drivers for:\n"
|
|
msg+=" WiFi, Bluetooth, GPU, audio, webcams, and more.\n\n"
|
|
if [ -n "$fw_bpo" ]; then
|
|
msg+=" ● Stable: ${fw_stable}\n"
|
|
msg+=" Ultra tested, but may lack support for\n"
|
|
msg+=" very recent hardware.\n\n"
|
|
msg+=" ● Backports: ${fw_bpo} (Recommended)\n"
|
|
msg+=" Updated firmware for modern hardware from\n"
|
|
msg+=" 2025/2026: recent GPUs, processors, WiFi.\n\n"
|
|
msg+="Choose version:"
|
|
if _confirm_custom "Firmware" "$msg" "Backports" "Stable"; then
|
|
_run_cmd "Firmware" "sudo apt install -y -t ${DEBIAN_CODENAME}-backports $fw_pkg" "Installing firmware from backports..."
|
|
else
|
|
_run_cmd "Firmware" "sudo apt install -y $fw_pkg" "Installing firmware from stable..."
|
|
fi
|
|
else
|
|
msg+=" Version: ${fw_stable}\n\n"
|
|
msg+="Install it?"
|
|
if _confirm "Firmware" "$msg"; then
|
|
_run_cmd "Firmware" "sudo apt install -y $fw_pkg" "Installing firmware..."
|
|
fi
|
|
fi
|
|
echo -e "${GREEN}Base firmware installed.${NC}"
|
|
fi
|
|
|
|
# 5. Install specific network firmware packages
|
|
_install_detected_firmware
|
|
|
|
# 6. Broadcom wireless handler
|
|
_handle_wireless
|
|
|
|
# 7. Bluetooth stack
|
|
_install_bluetooth_stack
|
|
|
|
# 8. Summary
|
|
echo -e "${GREEN}Network & firmware setup complete.${NC}"
|
|
_pause
|
|
}
|