mirror of
https://github.com/stornic56/debianito-post-install.git
synced 2026-09-14 06:02:35 +00:00
stornic56
0eacdc095f
- Removed 4 Broadcom classification helper functions (`_is_broadcom_brcm`, `_is_broadcom_b43`, `_is_broadcom_b43legacy`, `_detect_broadcom_plan_lines`) and their call in `install_firmware()`. - Rewrote `_handle_wireless()` to a single-path Broadcom → broadcom-sta-dkms → clean conflicting modules → load wl → verify approach, replacing the old 3-tier classification logic. - Added `linux-headers-amd64` availability verification via `apt-cache policy` before driver installation. - Added user confirmation step before installing Broadcom driver. - Preserved BT combo handling (softdep wl post: btusb) and Post-DKMS verification (Fix 5) with the same behavior as the original code. - Preserved USB Broadcom device detection (0a5c grep) and final message logic. - Removed `wl_conflict_offered` variable from `_handle_wireless()`. - All other helpers, arrays, and logic paths remain unchanged.
477 lines
18 KiB
Bash
477 lines
18 KiB
Bash
#!/usr/bin/env bash
|
|
|
|
# ── Global arrays ──
|
|
PCI_NET_DEVS=()
|
|
USB_WIFI_DEVS=()
|
|
PCI_BT_DEVS=()
|
|
USB_BT_DEVS=()
|
|
_DETECTED_FW_PKGS=()
|
|
_FW_PLAN_HW_LINES=()
|
|
_FW_PLAN_PKG_LINES=()
|
|
|
|
# ── Network device detection (PCI + USB) ──
|
|
_detect_all_network_devices() {
|
|
! is_installed pciutils && _run_install_pkg pciutils
|
|
! is_installed usbutils && _run_install_pkg usbutils
|
|
|
|
PCI_NET_DEVS=()
|
|
while IFS= read -r line; do
|
|
PCI_NET_DEVS+=("$line")
|
|
done < <(timeout 2 lspci -nn 2>/dev/null | grep -iE 'network controller|ethernet controller' || true)
|
|
|
|
USB_WIFI_DEVS=()
|
|
while IFS= read -r line; do
|
|
if echo "$line" | grep -qiE 'wireless|wifi|802\.11|bluetooth|wlan'; then
|
|
USB_WIFI_DEVS+=("$line")
|
|
fi
|
|
done < <(lsusb 2>/dev/null || true)
|
|
|
|
PCI_BT_DEVS=()
|
|
while IFS= read -r line; do
|
|
PCI_BT_DEVS+=("$line")
|
|
done < <(timeout 2 lspci -nn 2>/dev/null | grep -i 'Bluetooth controller' || true)
|
|
|
|
USB_BT_DEVS=()
|
|
while IFS= read -r line; do
|
|
if echo "$line" | grep -qi 'bluetooth'; then
|
|
if ! echo "$line" | grep -qiE 'wireless|wifi|802\.11|wlan'; then
|
|
USB_BT_DEVS+=("$line")
|
|
fi
|
|
fi
|
|
done < <(lsusb 2>/dev/null || true)
|
|
|
|
_FW_PLAN_HW_LINES=()
|
|
for dev in "${PCI_NET_DEVS[@]}"; do
|
|
local desc dev_type
|
|
desc=$(echo "$dev" | sed -E 's/^[^ ]+ [^:]+: //; s/ \[[0-9a-fA-F]{4}:[0-9a-fA-F]{4}\]//; s/ \(rev.*\)//')
|
|
if echo "$dev" | grep -qiE 'network controller|wireless|wi-fi|wlan|802\.11'; then
|
|
dev_type="WiFi PCI"
|
|
else
|
|
dev_type="Ethernet PCI"
|
|
fi
|
|
_FW_PLAN_HW_LINES+=(" \xe2\x97\x8f ${desc} (${dev_type})")
|
|
done
|
|
for dev in "${USB_WIFI_DEVS[@]}"; do
|
|
local desc
|
|
desc=$(echo "$dev" | sed 's/^.*ID //')
|
|
_FW_PLAN_HW_LINES+=(" \xe2\x97\x8f ${desc} (USB)")
|
|
done
|
|
|
|
for dev in "${PCI_BT_DEVS[@]}"; do
|
|
local desc
|
|
desc=$(echo "$dev" | sed -E 's/^[^ ]+ [^:]+: //; s/ \[[0-9a-fA-F]{4}:[0-9a-fA-F]{4}\]//; s/ \(rev.*\)//')
|
|
_FW_PLAN_HW_LINES+=(" \xe2\x97\x8f ${desc} (Bluetooth PCI)")
|
|
done
|
|
for dev in "${USB_BT_DEVS[@]}"; do
|
|
local desc
|
|
desc=$(echo "$dev" | sed 's/^.*ID //')
|
|
_FW_PLAN_HW_LINES+=(" \xe2\x97\x8f ${desc} (Bluetooth USB)")
|
|
done
|
|
}
|
|
|
|
# ── Firmware package mapping ──
|
|
_detect_firmware_needs() {
|
|
local -A pkg_info
|
|
_DETECTED_FW_PKGS=()
|
|
_FW_PLAN_PKG_LINES=()
|
|
|
|
local dev_list
|
|
dev_list=("${PCI_NET_DEVS[@]}" "${USB_WIFI_DEVS[@]}")
|
|
|
|
for dev in "${dev_list[@]}"; do
|
|
local raw_desc vendor_lc pkg
|
|
raw_desc=$(echo "$dev" | sed -E 's/^[^ ]+ [^:]+: //; s/ \[[0-9a-fA-F]{4}:[0-9a-fA-F]{4}\]//; s/ \(rev.*\)//')
|
|
vendor_lc=$(echo "$dev" | sed -n 's/^.*]: //p' | awk '{print $1}' | tr '[:upper:]' '[:lower:]')
|
|
|
|
[[ "$vendor_lc" != *intel* && "$vendor_lc" != *realtek* && "$vendor_lc" != *atheros* && "$vendor_lc" != *qualcomm* && "$vendor_lc" != *mediatek* ]] && continue
|
|
|
|
case "$vendor_lc" in
|
|
*intel*)
|
|
if echo "$dev" | grep -qiE 'wireless|wi-fi|wlan|802\.11'; then
|
|
pkg="firmware-iwlwifi"
|
|
else
|
|
pkg="firmware-intel-misc"
|
|
fi
|
|
;;
|
|
*realtek*) pkg="firmware-realtek" ;;
|
|
*atheros*|*qualcomm*) pkg="firmware-atheros" ;;
|
|
*mediatek*) pkg="firmware-mediatek" ;;
|
|
esac
|
|
|
|
local short_dev
|
|
short_dev=$(echo "$raw_desc" | sed 's/ *\[[^]]*\]//g; s/ */ /g')
|
|
if [ -z "${pkg_info[$pkg]-}" ]; then
|
|
pkg_info[$pkg]="$short_dev"
|
|
else
|
|
pkg_info[$pkg]+=", $short_dev"
|
|
fi
|
|
done
|
|
|
|
for pkg in "${!pkg_info[@]}"; do
|
|
_DETECTED_FW_PKGS+=("$pkg")
|
|
_FW_PLAN_PKG_LINES+=(" [+] ${pkg} \xe2\x86\x90 ${pkg_info[$pkg]}")
|
|
done
|
|
|
|
mapfile -t _DETECTED_FW_PKGS < <(printf '%s\n' "${_DETECTED_FW_PKGS[@]}" | sort -u)
|
|
}
|
|
|
|
# ── Build plan string ──
|
|
_build_firmware_plan() {
|
|
local plan=""
|
|
plan+="This section installs the essential non-free firmware stack\n"
|
|
plan+="for Debian (including CPU microcode, GPU, network, and core\n"
|
|
plan+="drivers). The script has scanned your hardware to prepare\n"
|
|
plan+="the setup:\n\n"
|
|
|
|
plan+="Detected controllers:\n"
|
|
if [ ${#_FW_PLAN_HW_LINES[@]} -eq 0 ]; then
|
|
plan+=" (none detected)\n"
|
|
else
|
|
for line in "${_FW_PLAN_HW_LINES[@]}"; do
|
|
plan+="${line}\n"
|
|
done
|
|
fi
|
|
|
|
plan+="\nPlanned firmware packages:\n"
|
|
local fw_line
|
|
if is_installed firmware-linux-nonfree; then
|
|
local cur_ver
|
|
cur_ver=$(dpkg -l firmware-linux-nonfree 2>/dev/null | awk '/^ii/{print $3}')
|
|
fw_line=" [+] firmware-linux-nonfree ${cur_ver} (already installed)"
|
|
else
|
|
fw_line=" [+] firmware-linux-nonfree (base meta-package)"
|
|
fi
|
|
plan+="${fw_line}\n"
|
|
|
|
for line in "${_FW_PLAN_PKG_LINES[@]}"; do
|
|
plan+="${line}\n"
|
|
done
|
|
|
|
local has_bt=false
|
|
[ ${#PCI_BT_DEVS[@]} -gt 0 ] && has_bt=true
|
|
[ ${#USB_BT_DEVS[@]} -gt 0 ] && has_bt=true
|
|
if ! $has_bt; then
|
|
for dev in "${USB_WIFI_DEVS[@]}"; do
|
|
if echo "$dev" | grep -qi 'bluetooth'; then
|
|
has_bt=true; break
|
|
fi
|
|
done
|
|
fi
|
|
|
|
plan+="\nBluetooth:\n"
|
|
if $has_bt; then
|
|
if is_installed bluez; then
|
|
plan+=" [+] bluez (already installed)\n"
|
|
else
|
|
plan+=" [+] bluez + bluez-tools + bluez-obexd (base stack)\n"
|
|
fi
|
|
case "${DESKTOP_ENV:-other}" in
|
|
kde) plan+=" [+] bluedevil (KDE applet)\n"
|
|
if [ "${AUDIO_SERVER:-}" = "pipewire" ]; then
|
|
plan+=" → pipewire-pulse + wireplumber (if missing)\n"
|
|
fi
|
|
;;
|
|
gnome) plan+=" (already in gnome-control-center)\n" ;;
|
|
*) plan+=" [+] blueman (GTK Bluetooth manager)\n" ;;
|
|
esac
|
|
plan+=" → Bluetooth service will be enabled\n"
|
|
else
|
|
plan+=" (no Bluetooth hardware detected)\n"
|
|
fi
|
|
|
|
plan+="\nInstallation order:\n"
|
|
plan+=" 1. Base firmware (firmware-linux-nonfree)\n"
|
|
plan+=" 2. Network firmware (realtek, iwlwifi, ...)\n"
|
|
plan+=" 3. Broadcom / Bluetooth firmware\n"
|
|
|
|
echo -e "$plan"
|
|
}
|
|
|
|
# ── Install detected firmware packages ──
|
|
_install_detected_firmware() {
|
|
local to_install=()
|
|
for pkg in "${_DETECTED_FW_PKGS[@]}"; do
|
|
if is_installed "$pkg"; then
|
|
echo " --> $pkg already installed."
|
|
continue
|
|
fi
|
|
local ver
|
|
ver=$(apt-cache policy "$pkg" 2>/dev/null | awk 'NR==3 {print $2; exit}')
|
|
if [ -z "$ver" ] || [ "$ver" = "(none)" ]; then
|
|
echo " --> $pkg not available in repositories, skipping."
|
|
continue
|
|
fi
|
|
to_install+=("$pkg")
|
|
done
|
|
if [ ${#to_install[@]} -gt 0 ]; then
|
|
_run_cmd "Firmware" "sudo DEBIAN_FRONTEND=noninteractive apt install -y ${to_install[*]}" \
|
|
"Installing network firmware packages..."
|
|
fi
|
|
}
|
|
|
|
# ── Wireless handler (Broadcom single-path wl) ──
|
|
_handle_wireless() {
|
|
local installed_any=false
|
|
local wl_build_failed=false
|
|
|
|
if [ ${#PCI_NET_DEVS[@]} -eq 0 ] && [ ${#USB_WIFI_DEVS[@]} -eq 0 ]; then
|
|
_detect_all_network_devices
|
|
fi
|
|
|
|
for dev in "${PCI_NET_DEVS[@]}"; do
|
|
local bcm_id dev_id
|
|
bcm_id=$(echo "$dev" | grep -oP '14e4:[0-9a-fA-F]+' || true)
|
|
[ -z "$bcm_id" ] && continue
|
|
dev_id=$(echo "$bcm_id" | cut -d: -f2 | tr '[:upper:]' '[:lower:]')
|
|
|
|
# --- Verificación de headers ---
|
|
if ! apt-cache policy linux-headers-amd64 2>/dev/null | grep -q "Candidate: [^ (none)]"; then
|
|
_msg "Broadcom Error" "linux-headers-amd64 is not available. Cannot compile Broadcom driver.\n\nEnsure non-free repositories are enabled and run:\n sudo apt install linux-headers-amd64"
|
|
_pause
|
|
continue
|
|
fi
|
|
|
|
# --- Confirmación ---
|
|
local bcm_ver header_ver
|
|
bcm_ver=$(apt-cache policy broadcom-sta-dkms 2>/dev/null | awk 'NR==3 {print $2}')
|
|
header_ver=$(apt-cache policy linux-headers-amd64 2>/dev/null | awk 'NR==3 {print $2}')
|
|
if ! _confirm "Broadcom WiFi" "Detected Broadcom wireless device.\n\nInstall broadcom-sta-dkms ${bcm_ver} + linux-headers-amd64 ${header_ver}?"; then
|
|
continue
|
|
fi
|
|
|
|
# --- Instalación ---
|
|
_run_cmd "Broadcom" "sudo DEBIAN_FRONTEND=noninteractive apt install -y linux-headers-amd64 broadcom-sta-dkms" || true
|
|
|
|
# --- Combo BT (sin cambios respecto al código actual) ---
|
|
local has_broadcom_bt=false
|
|
local btdev
|
|
for btdev in "${PCI_BT_DEVS[@]}"; do
|
|
if echo "$btdev" | grep -qi 'broadcom'; then
|
|
has_broadcom_bt=true
|
|
break
|
|
fi
|
|
done
|
|
if $has_broadcom_bt; then
|
|
echo -e "${YELLOW}[+] Broadcom WiFi+BT combo card detected.${NC}"
|
|
sudo mkdir -p /etc/modprobe.d
|
|
printf 'softdep wl post: btusb\n' | sudo tee /etc/modprobe.d/broadcom-combo.conf >/dev/null
|
|
echo -e "${YELLOW} A reboot may be required for Bluetooth support.${NC}"
|
|
fi
|
|
|
|
# --- Post-DKMS verification (Fix 5, sin cambios) ---
|
|
if ! ls /lib/modules/$(uname -r)/updates/dkms/wl.ko* 2>/dev/null | grep -q .; then
|
|
_msg "Broadcom DKMS Build Failed" "The wl module was not built by DKMS.\n\nPossible causes:\n- Missing build tools (build-essential, dkms)\n- Kernel update without headers\n- Incompatible kernel version\n\nTry: sudo dpkg-reconfigure broadcom-sta-dkms"
|
|
if _confirm "Broadcom" "Rebuild the Broadcom driver now?"; then
|
|
_run_cmd "Broadcom" "sudo dpkg-reconfigure broadcom-sta-dkms" || true
|
|
if ls /lib/modules/$(uname -r)/updates/dkms/wl.ko* 2>/dev/null | grep -q .; then
|
|
# wl.ko existe tras reconfigure → continuar a limpieza/carga
|
|
:
|
|
else
|
|
local dmesg_out
|
|
dmesg_out=$(sudo dmesg | tail -20 2>/dev/null || echo "(dmesg unavailable)")
|
|
_msg "Broadcom DKMS Still Failed" "dpkg-reconfigure did not produce wl.ko either.\n\nLast kernel messages:\n${dmesg_out}\n\nYou may need to check build logs or report a bug against broadcom-sta-dkms."
|
|
_pause
|
|
wl_build_failed=true
|
|
continue
|
|
fi
|
|
else
|
|
wl_build_failed=true
|
|
continue
|
|
fi
|
|
fi
|
|
|
|
# --- Limpieza de módulos conflictivos + carga wl (patrón Mint) ---
|
|
sudo modprobe -r b43 b43legacy b44 bcma brcmsmac brcmfmac ssb wl 2>/dev/null || true
|
|
sudo modprobe wl 2>/dev/null
|
|
|
|
# --- Verificación de carga ---
|
|
if lsmod | grep -q '^wl '; then
|
|
echo -e "${GREEN}[+] Broadcom WiFi activated (wl module loaded).${NC}"
|
|
_pause
|
|
installed_any=true
|
|
else
|
|
echo -e "${YELLOW}[+] Broadcom driver installed but wl module did not load.${NC}"
|
|
echo -e "${YELLOW} A system reboot is required.${NC}"
|
|
_pause
|
|
installed_any=true
|
|
fi
|
|
done
|
|
|
|
# --- USB Broadcom (sin cambios) ---
|
|
local usb_dev
|
|
for usb_dev in "${USB_WIFI_DEVS[@]}"; do
|
|
if echo "$usb_dev" | grep -qi '0a5c'; then
|
|
_msg "USB Broadcom" "USB Broadcom device detected (0a5c).\n\nLinux does not have native drivers for most USB Broadcom WiFi chips.\nndiswrapper may be needed as a last resort."
|
|
_pause
|
|
fi
|
|
done
|
|
|
|
# --- Mensaje final (sin cambios) ---
|
|
if ! $installed_any && ! $wl_build_failed; then
|
|
echo "No special WiFi firmware needed -- base firmware-linux-nonfree covers this system."
|
|
_pause
|
|
fi
|
|
}
|
|
|
|
# ── Ensure non-free repository is enabled ──
|
|
# Token-exact check for the "non-free" component. "non-free-firmware"
|
|
# contains the substring but is a different component, so word-boundary
|
|
# matching (\b) would produce false positives.
|
|
_has_nonfree_component() {
|
|
local file="$1"
|
|
grep -qE '^[^#]*[[:space:]]non-free([[:space:]]|$)' "$file" 2>/dev/null
|
|
}
|
|
|
|
_ensure_nonfree_repo() {
|
|
local nonfree_found=false
|
|
if [ -f /etc/apt/sources.list ] && _has_nonfree_component /etc/apt/sources.list; then
|
|
nonfree_found=true
|
|
fi
|
|
if ! $nonfree_found && [ -d /etc/apt/sources.list.d ]; then
|
|
for f in /etc/apt/sources.list.d/*.sources /etc/apt/sources.list.d/*.list; do
|
|
[ -f "$f" ] || continue
|
|
if _has_nonfree_component "$f"; then
|
|
nonfree_found=true
|
|
break
|
|
fi
|
|
done
|
|
fi
|
|
if $nonfree_found; then
|
|
return 0
|
|
fi
|
|
|
|
if ! _confirm "non-free Repository" "Component 'non-free' (and 'non-free-firmware') is required for WiFi/Bluetooth/GPU firmware.\n\nAdd them to your APT repositories?"; then
|
|
return 1
|
|
fi
|
|
|
|
# No active sources at all → bootstrap a complete configuration
|
|
if ! has_active_deb_sources; then
|
|
backup_current_repos
|
|
if ! bootstrap_repositories "main contrib non-free non-free-firmware"; then
|
|
return 1
|
|
fi
|
|
else
|
|
if [ -f /etc/apt/sources.list ]; then
|
|
# Add each missing component after "main", never duplicating
|
|
sudo sed -i -E '/^deb / { /(^|[[:space:]])non-free([[:space:]]|$)/! s/(main[^[:space:]]*)/\1 non-free/ }' /etc/apt/sources.list
|
|
# non-free-firmware does not exist on Bullseye
|
|
if [ "$DEBIAN_VERSION" != "11" ]; then
|
|
sudo sed -i -E '/^deb / { /(^|[[:space:]])non-free-firmware([[:space:]]|$)/! s/(main[^[:space:]]*)/\1 non-free-firmware/ }' /etc/apt/sources.list
|
|
fi
|
|
fi
|
|
if [ -d /etc/apt/sources.list.d ]; then
|
|
for f in /etc/apt/sources.list.d/*.sources; do
|
|
[ -f "$f" ] || continue
|
|
sudo sed -i -E '/^Components:/ { /(^|[[:space:]])non-free([[:space:]]|$)/! s/$/ non-free/ }' "$f"
|
|
if [ "$DEBIAN_VERSION" != "11" ]; then
|
|
sudo sed -i -E '/^Components:/ { /(^|[[:space:]])non-free-firmware([[:space:]]|$)/! s/$/ non-free-firmware/ }' "$f"
|
|
fi
|
|
done
|
|
fi
|
|
fi
|
|
|
|
# Verify the component was actually added before reporting success
|
|
local nonfree_ok=false
|
|
[ -f /etc/apt/sources.list ] && _has_nonfree_component /etc/apt/sources.list && nonfree_ok=true
|
|
if ! $nonfree_ok && [ -d /etc/apt/sources.list.d ]; then
|
|
for f in /etc/apt/sources.list.d/*.sources /etc/apt/sources.list.d/*.list; do
|
|
[ -f "$f" ] || continue
|
|
if _has_nonfree_component "$f"; then
|
|
nonfree_ok=true
|
|
break
|
|
fi
|
|
done
|
|
fi
|
|
if ! $nonfree_ok; then
|
|
echo -e "${RED}Failed to enable non-free repository. Check your APT sources.${NC}"
|
|
return 1
|
|
fi
|
|
|
|
sudo apt update
|
|
echo -e "${GREEN}non-free repository enabled.${NC}"
|
|
return 0
|
|
}
|
|
|
|
# ── Main entry point ──
|
|
install_firmware() {
|
|
echo -e "${YELLOW}Base firmware check...${NC}"
|
|
|
|
if ! _ensure_nonfree_repo; then
|
|
_msg "Error" "No 'non-free' repositories were enabled and the user declined to add them.\nPlease enable non-free manually or accept the prompt in the Firmware option." 10 65
|
|
return 1
|
|
fi
|
|
|
|
# 1. Detect
|
|
_detect_all_network_devices
|
|
_detect_firmware_needs
|
|
|
|
# 2. Plan
|
|
local plan
|
|
plan=$(_build_firmware_plan)
|
|
_msg "Firmware, Wireless & Bluetooth Setup" "$plan" 22 72
|
|
|
|
# 3. Confirm
|
|
if ! _confirm "Firmware" "Apply the network & firmware plan?"; then
|
|
echo "Firmware installation skipped."
|
|
return
|
|
fi
|
|
|
|
# 4. Install base firmware meta-package (unchanged logic)
|
|
local fw_pkg="firmware-linux-nonfree"
|
|
local fw_bpo
|
|
fw_bpo=$(apt-cache madison "$fw_pkg" 2>/dev/null | \
|
|
grep "${DEBIAN_CODENAME}-backports" | awk '{print $3}' | head -1)
|
|
|
|
local fw_stable
|
|
fw_stable=$(apt-cache policy "$fw_pkg" 2>/dev/null | awk 'NR==3 {print $2; exit}')
|
|
|
|
if is_installed "$fw_pkg"; then
|
|
if [ -n "$fw_bpo" ]; then
|
|
local current_ver
|
|
current_ver=$(dpkg -l "$fw_pkg" 2>/dev/null | awk '/^ii/{print $3}')
|
|
if _confirm "Firmware" "firmware-linux-nonfree ${current_ver} already installed.\n\nUpgrade to backports version ${fw_bpo}?\n\nBackports often includes newer hardware support."; then
|
|
_run_cmd "Firmware" "sudo apt install -y -t ${DEBIAN_CODENAME}-backports $fw_pkg" "Upgrading firmware..."
|
|
fi
|
|
else
|
|
echo "$fw_pkg already installed."
|
|
fi
|
|
else
|
|
local msg="firmware-linux-nonfree provides hardware drivers for:\n"
|
|
msg+=" WiFi, Bluetooth, GPU, audio, webcams, and more.\n\n"
|
|
if [ -n "$fw_bpo" ]; then
|
|
msg+=" ● Stable: ${fw_stable}\n"
|
|
msg+=" Ultra tested, but may lack support for\n"
|
|
msg+=" very recent hardware.\n\n"
|
|
msg+=" ● Backports: ${fw_bpo} (Recommended)\n"
|
|
msg+=" Updated firmware for modern hardware from\n"
|
|
msg+=" 2025/2026: recent GPUs, processors, WiFi.\n\n"
|
|
msg+="Choose version:"
|
|
if _confirm_custom "Firmware" "$msg" "Backports" "Stable"; then
|
|
_run_cmd "Firmware" "sudo apt install -y -t ${DEBIAN_CODENAME}-backports $fw_pkg" "Installing firmware from backports..."
|
|
else
|
|
_run_cmd "Firmware" "sudo apt install -y $fw_pkg" "Installing firmware from stable..."
|
|
fi
|
|
else
|
|
msg+=" Version: ${fw_stable}\n\n"
|
|
msg+="Install it?"
|
|
if _confirm "Firmware" "$msg"; then
|
|
_run_cmd "Firmware" "sudo apt install -y $fw_pkg" "Installing firmware..."
|
|
fi
|
|
fi
|
|
echo -e "${GREEN}Base firmware installed.${NC}"
|
|
fi
|
|
|
|
# 5. Install specific network firmware packages
|
|
_install_detected_firmware
|
|
|
|
# 6. Broadcom wireless handler
|
|
_handle_wireless
|
|
|
|
# 7. Bluetooth stack
|
|
_install_bluetooth_stack
|
|
|
|
# 8. Summary
|
|
echo -e "${GREEN}Network & firmware setup complete.${NC}"
|
|
_pause
|
|
}
|